CVAX
DEC's second-generation single-chip VAX microprocessor with DRAM cache
CVAX is a microprocessor chipset from Digital Equipment Corporation that runs the VAX instruction set. The CVAX 78034 CPU arrived in systems in late 1987 and was the first VAX processor with on-chip cache, using one-transistor DRAM cells to save die area.
- First VAX microprocessor with internal cache
- First microprocessor to use one-transistor DRAM for cache
- 134,000 transistors on a 9.7 by 7.4 mm die
- CVAX+ shrink ran at 16.67 MHz on CMOS-2
- SOC variant put CPU, FPU and 8 KB cache on one die
What it is
CVAX is a chipset built by Digital Equipment Corporation around the VAX instruction set. Its main part, the 78034, is a second-generation single-chip VAX processor. Machines using it reached customers in late 1987. The set also included a floating-point helper, a clock chip and three support chips for memory, system control and the Q-Bus. Its standout feature is the on-chip cache, built from one-transistor DRAM cells rather than the SRAM cells almost every other processor uses. That choice cut the cache array's footprint by roughly 2.4 to 3 times compared with four-transistor DRAM or six-transistor SRAM designs.
How it came about
The design team at DEC built the 78034 as a follow-on to the earlier MicroVAX 78032. They wanted on-chip cache but could not afford the silicon area that SRAM would demand, so they turned to one-transistor DRAM, a first for a microprocessor cache. A shrunk version, CVAX-60, taped out in August 1987, ahead of volume production of the original. The matching floating-point part taped out that November. Shipped upgrades followed in late 1988, and a single-die SOC variant appeared in 1990.
Inside the chip
The 78034 is microprogrammed and partly pipelined, split into six blocks: an I-Box that fetches and decodes VAX instructions using a decode ROM, an E-Box holding registers, a 32-bit program counter, a shifter and a 32-bit ALU, an M-Box memory manager with a 28-entry fully associative translation look-aside buffer, a bus interface, the cache, and a control store with microsequencer. The control ROM holds 1,600 words of 41 bits each. Register files allow several accesses at once so the execution units stay busy.
How it was made
Both the 78034 and the CFPA floating-point chip were built in DEC's own CMOS-1 process, a 2.0 µm technology with two aluminium wiring layers. The CPU die measures 9.7 by 7.4 mm and carries 134,000 transistors; the CFPA measures 7.3 by 9.1 mm with 65,000. The CPU sits in an 84-pin ceramic carrier with a heat sink, runs on +5 V and tops out at 1.5 W. Later shrinks moved to CMOS-2 at 1.5 µm and CMOS-3 at 1.0 µm.
Where it went
Higher-end VAX 6000 Model 200 machines ran the chip at 12.5 MHz, while the MicroVAX 3500 and 3600 used 11.11 MHz. The later SOC part served entry-level servers, workstations and VXT-2000 X terminals, and also worked as an embedded processor inside DEC's top printers and terminals.
Versions and family
CVAX+ was an optical shrink of the 78034, CFPA and CMCTL onto the finer CMOS-2 process, running at 16.67 MHz with the same power draw. The shrunk CPU was called CVAX-60. SOC packed the CPU, floating-point unit, clock chip and an 8 KB second-level cache onto one die at 25 or 28.5 MHz in CMOS-3. The 78032 came before it; Rigel was the next step.
Why it matters
The 78034 was the first VAX part with internal cache and the first microprocessor to cache with one-transistor DRAM, showing that dense memory cells could serve as fast on-chip storage. Its DRAM cache idea and the shrink-plus-integration path from CVAX to CVAX+ to SOC kept the VAX line competitive through the late 1980s and into 1990.
Problems and reception
The DRAM cache stood out as unusual, since nearly all other designs used SRAM. When Rigel slipped because of yield problems, CVAX+ upgrades were offered for the VAX 6000 to fill the gap.

Questions people ask about CVAX
What is CVAX?
It is a Digital Equipment Corporation chipset that implements the VAX instruction set. The main part is the 78034 single-chip processor, joined by a floating-point accelerator, a clock chip and support chips for memory, system control and the Q-Bus.
Why did DEC use DRAM for the cache?
SRAM or four-transistor DRAM cells would have taken 2.4 to 3 times the area. One-transistor DRAM cells let the team fit a 1 KB combined instruction and data cache in a narrow strip along one side of the die.
How fast was it?
The original ran at 12.5 MHz in the VAX 6000 Model 200 and 11.11 MHz in the MicroVAX 3500 and 3600. The CVAX+ shrink reached 16.67 MHz, and the SOC version ran at 25 or 28.5 MHz.
How was it built?
DEC fabricated it in-house on its CMOS-1 process at 2.0 µm with two aluminium interconnect layers. The CPU die holds 134,000 transistors and ships in an 84-pin ceramic carrier with a heat sink, drawing up to 1.5 W from a +5 V supply.
Good reading and sources
The facts on this page come from the Wikipedia article "CVAX", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.