News
EveryChip
The top side of an AMD Phenom II X4 840 (HDX840WFK42GM) CPU

Phenom II

A family of multi-core desktop processors using the K10 microarchitecture and 45 nm process.

Advanced Micro Devices released the Phenom II line in late 2008 as a successor to the original Phenom. The chips used the K10 design on a 45 nm node and offered two, three, four or six cores for desktop computing platforms.

Share on WhatsApp

  • Released in December 2008 as the successor to the original Phenom.
  • Used a 45 nm process manufactured by GlobalFoundries.
  • Featured up to 6 MB of shared L3 cache, triple the previous generation.
  • Supported both Socket AM2+ and Socket AM3 interfaces.
  • Included Turbo Core technology for automatic frequency boosting.

What it is

The Phenom II is a family of central processing units designed by AMD for desktop computers. It succeeded the first-generation Phenom and utilised the K10 microarchitecture built on a 45 nanometre manufacturing process. The lineup featured processors with two, three, four or six cores. AMD launched the initial Socket AM2+ models in December 2008, followed by Socket AM3 versions supporting DDR3 memory in early 2009. A six-core variant arrived in April 2010. These chips formed part of broader platform strategies, such as the Dragon Platform paired with Radeon HD 4800 graphics.

How it came about

AMD introduced the Phenom II to address performance gaps and power efficiency issues found in its predecessor. The first variants appeared in December 2008 on the older AM2+ socket. A major update came in February 2009 with the AM3 socket, which added support for faster DDR3 RAM while remaining backward compatible with existing motherboards via BIOS updates. The family expanded significantly in April 2010 with the introduction of the Thuban six-core processor. Production continued until 2012, bridging the gap between the Phenom and the subsequent FX series.

Inside the chip

The architecture relies on the K10 design, featuring separate L1 instruction and data caches of 64 KB per core, along with 512 KB of L2 cache. A key improvement was the tripling of the shared L3 cache to 6 MB, which boosted benchmark scores. Power management used Cool'n'Quiet across the entire chip rather than per-core, helping to manage thread scheduling issues in Windows Vista. Some models supported Turbo Core technology, which automatically overclocked active cores when others were idle. The chips supported x86-64 instructions, MMX, SSE extensions and AMD-V virtualisation.

How it was made

Manufacturing took place at GlobalFoundries using a 45 nm silicon-on-insulator process with immersion lithography. AMD employed die harvesting to create lower-core-count variants from larger dies. For instance, the six-core Thuban die was used to produce four-core Zosma chips by disabling defective cores. Similarly, three-core Heka and two-core Callisto chips were derived from the four-core Deneb die. This strategy allowed AMD to offer a wide range of products from fewer base designs. Die sizes varied, with the six-core Thuban measuring 346 mm² and the four-core Deneb at 258 mm².

Phenom II
A drawing made by EveryChip from what this page says. It is a diagram, not a picture of the real chip.

Where it went

These processors were intended for personal computers and desktop systems. They served as the central component in AMD's Dragon Platform, working alongside 790 series chipsets and Radeon HD 4800 graphics cards. The six-core Thuban model was also part of the Leo Platform, which included the AMD 890 chipset and Radeon HD 5800 series graphics. Dual-processor configurations required the Socket F+ interface for the Quad FX platform. The chips targeted mainstream consumers and enthusiasts who valued multi-threaded performance and overclocking potential.

Versions and family

The family included several distinct core designs marketed under different series. The flagship 1000T series comprised six-core Thuban chips with Turbo Core. The 900T series featured six-core dies with two cores disabled. The standard 900 series contained full four-core Deneb chips. Lower-end options included the 800 series, which used harvested Deneb dies with reduced cache or no L3 cache, and the Propus-based 840/850 models. Three-core Heka and two-core Callisto variants completed the range, offering budget-friendly options with disabled cores.

Why it matters

The Phenom II extended the lifespan of the K10 architecture and remained relevant through 2012. It was notable for its high overclocking headroom, with some models reaching extreme frequencies using liquid nitrogen cooling. Enthusiasts frequently unlocked disabled cores on cheaper models, though success rates varied. The introduction of Turbo Core provided a software-driven performance boost that influenced later AMD designs. The lineage ended with the FX series, which moved to a new modular architecture.

Problems and reception

Users praised the chip's ability to reach very high clock speeds, with records set during public demonstrations at CES 2009. However, some high-wattage AM3 models required motherboards with dual power-plane support; incompatible boards would lock the multiplier, causing performance issues. The unlocking of disabled cores was popular but unreliable, as some chips had permanently defective silicon. Despite these quirks, the family was well-regarded for its value and performance in the mid-to-high end market.

Questions people ask about Phenom II

What is the difference between Phenom II sockets?

Socket AM2+ versions lack forward compatibility with AM3. AM3 sockets are backwards-compatible with AM2+ motherboards if updated with a BIOS. AM3 controllers support both DDR2 and DDR3 memory, allowing upgrades without changing RAM.

How does Turbo Core work?

Turbo Core allows the processor to automatically overclock active cores by up to 500 MHz when not all cores are needed. When more cores are required, it returns to standard speeds. This feature is available on Thuban and Zosma based models.

Can I unlock disabled cores on Phenom II CPUs?

Some users can unlock disabled cores via BIOS settings, but success is not guaranteed. If the core was disabled due to hardware defects, unlocking will not work. Reports suggest a roughly 70% success rate, but results vary.

Good reading and sources

Where this page comes from

The facts on this page come from the Wikipedia article "Phenom II", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.

It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-15.

Photo credits on this page

The small pictures above come from Wikimedia Commons under free licences. Some are cropped to fit.

The weekly digest

Every Monday: the chip of the day, new pages on EveryChip, and the conferences and anniversaries of the week ahead.