Yorkfield
Intel's 45 nm quad-core desktop chip, sold as Core 2 Quad and Xeon
Yorkfield is the code name for a family of Intel desktop processors sold as Core 2 Quad, Core 2 Extreme and Xeon 33xx. Built as two dual-core dies in one package on a 45 nm process, it arrived from late 2007 to 2008 and was the first Intel desktop chip made with high-k metal gates.
- First Intel desktop processor built on 45 nm with high-k metal gates
- Two dual-core dies in one package, four cores in total
- 12 MB or 6 MB of L2 cache depending on the variant
- 820 million transistors on two 107 mm2 dies
- QX9650 launched 11 November 2007 at 3 GHz
What it is
Yorkfield is the code name for a set of Intel processors sold under the Core 2 Quad, Core 2 Extreme and Xeon 33xx brands. It is a quad-core desktop part built from two dual-core dies mounted together in one package, a design called a multi-chip module. Clock speeds run from 2333 MHz to 3200 MHz, with a front-side bus between 1066 and 1600 MT/s. The chips fit LGA 775 and LGA 771 sockets. Yorkfield arrived as the 45 nm step in Intel's Tick-Tock programme, and the Extreme QX9650 of November 2007 was the first Intel desktop processor built on 45 nm with high-k metal gates.
How it came about
Yorkfield replaced Kentsfield as Intel moved the Core design down to 45 nm. The first part, Core 2 Extreme QX9650, shipped on 11 November 2007. The mainstream Q9300 and Q9450 were planned for January 2008 but slipped to 15 March 2008. Early talk blamed a fault in the chip, while later reports said the wait was needed so the parts would work on the four-layer printed circuit boards used by ordinary motherboards. Intel had shown a Yorkfield running beside a Kentsfield at the 2007 Intel Developer Forum.
Inside the chip
Each package holds two dual-core dies, giving four cores in total. Every die carries its own unified L2 cache, so the big version has 12 MB in two 6 MB blocks and the smaller Yorkfield-6M has 6 MB in two 3 MB blocks. The 6 MB part is built from Wolfdale-3M style cores and appears as Core 2 Quad Q8xxx with 4 MB active, or Q9xxx and Xeon X3320/X3330 with all 6 MB usable. The design speaks x64 and adds the SSE4.1 instruction set. Communication with the rest of the system goes over a front-side bus running at 1333 MT/s or faster.
How it was made
Yorkfield is a 45 nm part, the shrink of the Core microarchitecture that Intel called CPUID model 23. The QX9650 carries 820 million transistors across two dies of 107 mm2 each. It was the first Intel desktop processor to use high-k metal gates. Chips go into LGA 775 packages for normal boards and LGA 771 for the dual-socket and OEM parts.
Where it went
These processors went into desktop computers as Core 2 Quad Q8xxx and Q9xxx, and into servers as Xeon 33xx. They work with the Bearlake chipset. The OEM-only Xeon X33x3 parts, known as Yorkfield CL, use LGA 771 and are meant for single-socket blade servers that would otherwise need dual-processor chips such as Harpertown. QX9775 also targets dual LGA 771 boards.
Versions and family
The family splits by cache and socket. Full Yorkfield parts carry 12 MB of L2; Yorkfield-6M carries 6 MB. Yorkfield XE covers the Core 2 Extreme QX9650, QX9770 and QX9775. Yorkfield CL covers the Xeon X33x3 line. Close relatives include the dual-core Wolfdale, the mobile Penryn-QC, the dual-socket Harpertown and the multi-processor Dunnington. Kentsfield came before it; Lynnfield and Bloomfield, both based on Nehalem, followed.
Why it matters
Yorkfield marked the point where Intel's 45 nm process and high-k metal gates reached ordinary desktops. Its dual-die approach let Intel offer four cores without a single large die, and the same basic package idea carried across the Core 2 Quad and Xeon 33xx ranges. It sat between the older Core design and the Nehalem generation that replaced it.
Problems and reception
The January 2008 launch slipped to March, first explained as a chip error and later as a compatibility issue with four-layer motherboard PCBs. Early Core 2 Quad Q8xxx parts lacked Intel VT, unlike the Q9xxx line, though later Q8xxx versions shipped with VT enabled. The family is now listed as unsupported.
Questions people ask about Yorkfield
What exactly is Yorkfield?
It is the code name for a group of Intel desktop processors sold as Core 2 Quad, Core 2 Extreme and Xeon 33xx. Each chip is a multi-chip module holding two dual-core dies, giving four cores, and it was made on a 45 nm process.
How does it differ from Kentsfield?
Kentsfield was the earlier model that Yorkfield replaced. Yorkfield is the 45 nm shrink of the Core microarchitecture, called Penryn, and adds SSE4.1 instructions plus high-k metal gates. Both use the same dual-die quad-core packaging idea.
Why are there two cache sizes?
The larger Yorkfield has 12 MB of L2, split as 6 MB per die. Yorkfield-6M uses two Wolfdale-3M style cores for 6 MB total, 3 MB per die. Some Q8xxx parts run with only 4 MB enabled.
What replaced it?
Nehalem-based chips took over: Lynnfield for desktops and low-end servers, and Bloomfield for enthusiast and single-socket workstation machines.
Good reading and sources
The facts on this page come from the Wikipedia article "Yorkfield", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.