SPARC T3
16-core multithreaded server CPU by Oracle
The SPARC T3 is a multi-core central processing unit launched by Oracle in September 2010. It features sixteen cores and supports high thread counts to maximise throughput in server environments, succeeding the UltraSPARC T2.
- Launched by Oracle on 20 September 2010
- Features 16 cores and 128 hardware threads
- Built using a 40 nm manufacturing process
- Includes embedded security co-processors per core
- Supports up to four sockets without glue logic
What it is
The SPARC T3 is a central processing unit designed for servers. It was developed by Sun Microsystems and released by Oracle Corporation in late 2010. This chip focuses on handling many tasks at once through multithreading. It belongs to the SPARC family of processors. The design aims to improve data throughput while reducing the number of physical sockets needed in a system compared to earlier models.
How it came about
Development began under Sun Microsystems before its acquisition by Oracle. Early reports in 2008 suggested different core counts, but later roadmaps clarified the design. Sun revealed the final specifications at the Hot Chips 21 conference, confirming sixteen cores. The processor was officially launched in San Francisco in September 2010. During this event, Oracle dropped the Ultra prefix from the name and presented new benchmark results.
Inside the chip
The chip contains either eight or sixteen cores, with each core supporting eight hardware threads. This allows up to 128 threads per socket. It includes a six megabyte level two cache with high bandwidth. The architecture integrates security co-processors on every core for encryption tasks. It also features embedded network interfaces and supports direct memory access via DDR3 channels. Four sockets can connect without extra glue logic.
How it was made
Manufacturing used a forty nanometre process node. The die size is approximately 377 square millimetres. The design incorporates six clock domains and four voltage domains to manage power and yield. These techniques help balance performance against energy use. The input and output interface supports high aggregate throughput across the socket links.
Where it went
This processor powers the Oracle SPARC T-series servers. Models include single, dual, and quad socket configurations in rack and blade forms. It replaces older UltraSPARC T2 based machines. The chip suits workloads like web serving where high concurrency is vital. It supports virtualisation technologies allowing many domains to run on one physical server.
Versions and family
The SPARC T3 succeeds the UltraSPARC T2 and T2 Plus. It was followed by the SPARC T4. During development, it was known by codenames such as Rainbow Falls and Niagara-3. The final product offers double the cores of its predecessor. It also doubles the cryptographic acceleration capabilities and memory bandwidth.
Why it matters
The launch introduced a new generation of Oracle servers. Benchmarks claimed world-record performance for specific throughput tests. It demonstrated that fewer sockets could deliver higher performance than previous quad-socket systems. This shift influenced server density and efficiency expectations in data centres using SPARC architecture.
Problems and reception
Initial media reports contained inaccuracies regarding core and thread counts. These were corrected as official details emerged. The final disclosure included full system benchmarks and application performance data. Industry observers noted the significant increase in cryptographic throughput and I/O capacity compared to prior generations.
Questions people ask about SPARC T3
Who designed and released the SPARC T3?
Sun Microsystems designed the processor. Oracle Corporation released it to the market in September 2010 after acquiring Sun. It is part of the SPARC family of chips.
How many cores and threads does the SPARC T3 have?
The chip features sixteen cores. Each core supports eight hardware threads, allowing for a total of 128 threads per socket. Some configurations may use eight cores.
What manufacturing process was used for this chip?
Oracle disclosed that the SPARC T3 was built using a forty nanometre process. The die size is approximately 377 square millimetres, integrating multiple functional units.
What are the main improvements over the UltraSPARC T2?
The T3 has double the cores, double the crypto accelerators, and faster DDR3 memory support. It also provides quadruple the I/O throughput and integrates more security algorithms directly on the die.
Good reading and sources
The facts on this page come from the Wikipedia article "SPARC T3", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like SPARC T3
All CPUs and microprocessors
🇯🇵 JapanSPARC64 V
Fujitsu SPARC V9 server microprocessor from 2001CPU · SPARC · 2001