
MOS Technology 8568
Video display controller for the Commodore 128DCR computer
The MOS Technology 8568 is a video display controller released in 1985. It powered the 80-column RGBI colour output on the Commodore 128DCR personal computer. This chip integrated features from earlier controllers and added support for digital colour displays.
- Released in 1985 for the Commodore 128DCR
- Supports 720x700 pixel maximum resolution
- Uses indirect register access for control
- Integrates logic from the older 8563 chip
- Provides 16 colours via digital RGBI output
What it is
The MOS Technology 8568 is a video display controller designed to manage graphics output. Released in 1985, it served as the primary graphics processor for the 80-column display on the Commodore 128DCR personal computer. Service manuals often labelled it the 80 column CRT controller. The chip handled digital RGBI signals, allowing for sixteen colours or grey shades. It succeeded the older 8563 model by integrating additional logic directly onto the silicon.
How it came about
This component evolved from the earlier 6545E monochrome controller and the 8563 video chip. The original Commodore 128 and European 128D models used the 8563, which required external discrete components for full functionality. The 8568 combined these functions into a single unit, reducing the need for extra parts near the processor. Final production batches carried revision codes R9a or R9b, suggesting minor undocumented improvements were made during its lifecycle.
Inside the chip
The chip supports a maximum resolution of 720 by 700 pixels and interlaced modes. It offers three character modes including standard, semigraphic, and high-resolution bitmap. Unlike the memory-mapped VIC-II chip found in the Commodore 64, the 8568 uses indirect access methods. Software must select one of thirty-seven internal registers and wait for a ready signal before reading or writing data. This process makes rapid screen updates difficult for fast-paced action games.
How it was made
Manufactured with a 48-pin package, the device operates on a five-volt direct current supply. It can address up to 64 kilobytes of memory and interfaces with specific types of dynamic random-access memory chips. The North American C-128DCR model included 64K of local video RAM for this controller. European C-128D units varied, containing either 16K or 64K depending on the manufacturing date.
Where it went
Its primary application was driving the secondary monitor output on the Commodore 128DCR. While the main display used the VIC-II chip for forty-column text, the 8568 handled eighty-column text and higher-resolution graphics. Users could run both displays simultaneously if connected to compatible monitors. The hardware remains visible on system buses even when the computer runs in compatibility mode for older software.
Versions and family
The 8568 replaced the 8563 video controller. Although they share similar core features, the pin assignments and electrical interfaces differ, making them non-interchangeable. The newer chip includes an active low interrupt request line that signals when the status register is ready. This feature was not present or used in the same way on the previous 8563 model.
Why it matters
By integrating glue logic, the 8568 simplified the circuit board design for the Commodore 128DCR. It enabled affordable eighty-column text displays for business applications on home computers. The indirect register access method, however, limited its performance in graphics-intensive tasks compared to memory-mapped alternatives. This design choice influenced how developers wrote software for high-resolution modes on the platform.
Questions people ask about MOS Technology 8568
What computer used the MOS Technology 8568?
This video display controller was used in the Commodore 128DCR personal computer. It managed the eighty-column text and high-resolution graphics output for that specific model.
How does the 8568 differ from the 8563?
The 8568 integrates glue logic that was previously separate components on the 8563. They are not electrically interchangeable due to different pin assignments and interface requirements.
Why is the 8568 slow for arcade games?
Accessing the chip requires selecting internal registers and waiting for a ready signal. This indirect method is too cumbersome for the rapid pixel manipulation needed in fast-action video games.
Good reading and sources
The facts on this page come from the Wikipedia article "MOS Technology 8568", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like MOS Technology 8568
All graphics processors
🇯🇵 JapanYamaha V9938
Video display processor for MSX2 home computersGPU · Other · 1985
🇺🇸 United StatesTMS34010
First programmable graphics processor integrated circuitGPU · Other · 1986
More from MOS Technology
All of them
WorldMOS Technology 8563
Video chip for the Commodore 128 computerAnalog · 1985
🇯🇵 JapanRicoh 2A03
8-bit CPU and sound chip for the Nintendo Entertainment SystemCPU · 68k · 1983