GA144
A 144-core asynchronous stack microprocessor built from tiny F18A nodes
The GA144 is a 144-core asynchronous microprocessor designed by Charles H. Moore and sold by GreenArrays from October 2011. Its 18-bit stack-based F18A nodes sit in an 18-by-8 grid and talk only to their neighbours, making it a spatial processor with no shared memory.
- 144 independent 18-bit stack nodes in an 18-by-8 grid
- No global clock and no shared memory between nodes
- Peak aggregate rate quoted as 96 billion operations per second
- Power range of 14 microwatts to 650 milliwatts
- Announced for sale by GreenArrays in October 2011
What it is
GA144 is a microprocessor that packs 144 small computers onto one chip. Each unit is an 18-bit stack machine called the F18A, and the units are laid out as a grid eighteen wide by eight high. Charles H. Moore designed it and GreenArrays developed and sold it, announcing the part for sale in October 2011 under the names GA144-1.2 and G144A12. What makes it unusual is that it has no central clock and no memory shared between units. Instead each node works on its own and swaps data with the nodes beside it. That arrangement is called a spatial processor.
How it came about
The design comes from Charles H. Moore, who created the Forth language and the stack-based processors that followed from it. GreenArrays took the work forward and put the chip on sale in October 2011. The problem the team addressed was how to run many small programs at once without the cost and power of a shared clock and shared memory. Each node runs independently, so the chip can keep working at whatever pace its activity allows.
Inside the chip
Every F18A node holds 64 words of RAM and 64 words of ROM, plus its own stacks. That is a small workspace, so larger jobs have to be split across nodes by hand. Nodes exchange data through blocking reads and writes with their immediate neighbours. Code that stretches across far-apart nodes has to send messages along a path and take care that no node ends up waiting forever. GreenArrays provided arrayForth, a Forth-based environment, for writing programs. Twenty-two nodes on the edge of the grid bring signals out of the chip through digital and analogue pins, parallel ports, SPI, serial boot links and serializer/deserializer channels.
How it was made
GreenArrays sold the device in an 88-pin QFN package, a flat square part with contacts on its underside. The manufacturing process and transistor count are not part of the published details here. Because the circuit is asynchronous, timing and energy shift with node activity, supply voltage, temperature and the mix of instructions being run.
Where it went
The chip suits work where many small tasks run in parallel and power matters. Researchers have used it as a testbed. At the University of California, Berkeley, Phitchaya Phothilimthana built Chlorophyll, a compiler and programming model that helps write code for the array. A team at Ruhr University Bochum coded AES and RSA for the GA144 and studied how well their AES resisted power-analysis attacks.
Versions and family
The part was marketed as GA144-1.2, also written G144A12. The computing element inside it is the F18A, an 18-bit stack design. No predecessor or successor chip appears in the record.
Why it matters
The GA144 showed that a chip could run many independent stack machines with no global clock at all. Its peak aggregate figure was quoted as 96 billion operations per second, with power between 14 microwatts and 650 milliwatts depending on load. Academic work on compilers and cryptography kept it in use as a research platform.
Problems and reception
Writing code for the array is demanding, since memory per node is tiny and message paths must be planned to avoid deadlock. The Chlorophyll project at Berkeley was created in part to ease that burden.
Questions people ask about GA144
What kind of chip is the GA144?
It is a microprocessor made of 144 small 18-bit stack machines called F18A nodes. The nodes sit in a grid and each one runs on its own, with no clock shared across the chip and no memory that all of them can see.
How do the nodes talk to each other?
Each node exchanges data with the neighbours beside it using blocking reads and writes. A program that reaches across the grid has to pass messages from node to node and must be written so that no node gets stuck waiting for data that never arrives.
How much memory does each node have?
Every F18A node has 64 words of RAM and 64 words of ROM, along with its own stacks. Because that is so little, bigger programs and data sets have to be divided up and spread across many nodes.
What tools exist for programming it?
GreenArrays supplied arrayForth, a Forth-based development environment. Later, Phitchaya Phothilimthana at the University of California, Berkeley created Chlorophyll, a compiler and programming model aimed at making the array easier to use.
How much power does it use?
GreenArrays quoted a range from 14 microwatts up to 650 milliwatts, with the figure depending on how busy the chip is. Since there is no fixed clock, energy and timing shift with activity, supply voltage, temperature and the instructions being executed.
Good reading and sources
The facts on this page come from the Wikipedia article "GA144", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like GA144
All CPUs and microprocessors
🇩🇪 GermanyU80701
East German 32-bit microprocessor clone of the DEC MicroVAXCPU · Other · 1990