F-14 Central Air Data Computer
Custom digital flight-control chipset built for the F-14 Tomcat fighter
A multi-chip digital flight control system built by Garrett AiResearch for early US Navy F-14 Tomcat fighters. Designed from 1968 and finished in June 1970, it turned pressure and temperature readings into flight figures and has been claimed as the first microprocessor chipset.
- Designed 1968 to June 1970 for the F-14 Tomcat
- First military aircraft with custom digital ICs
- MP944 set: 375 kHz, 9,375 instructions per second
- 28 chips, 6 DIP types, 74,442 transistors
- Classified by the Navy until 1998
What it is
The Central Air Data Computer, or CADC, is a digital flight-control system built for the F-14 Tomcat, the US Navy's carrier fighter. Garrett AiResearch designed and produced it as a set of custom MOS chips rather than a single processor. From pitot and static pressure plus temperature, it worked out altitude, vertical speed, air speed and Mach number. Development ran from 1968 to 1970, and the F-14 became the first military aircraft to fly with custom digital integrated circuits. The design has been claimed as the first microprocessor chipset, ahead of the Intel 4004.
How it came about
Work began in 1968 under Steve Geller and Ray Holt, with help from the startup American Microsystems. The team finished in June 1970, ahead of several electromechanical rivals also proposed for the F-14. Chip technology of the day could not pack enough transistors onto one die for a single-chip flight processor, so the job was split across many parts. The Navy kept the project classified until 1998. Holt recounted the effort in his autobiography The Accidental Engineer, and wrote about the system for Computer Design magazine in 1971.
Inside the chip
The MP944 set ran at 375 kHz and carried out 9,375 instructions per second. Numbers were held as 20-bit fixed-point fractions in two's complement form. Six distinct DIP chip types made up 28 packages in all, using 74,442 transistors. These were grouped into three modules. Within each module, ROMs stream microinstructions and constants to a steering unit, which feeds a compute block (PMU, PDU or SLF). Results land in a register file and can move to any module. Each module forms its own pipeline, and several pipelines can run together, a technique called pipeline concurrency. ROM holds 128 words of 20 bits, with a counter that can reset, step, hold, or take a new address.
How it was made
The parts were MOS custom integrated circuits, produced with support from American Microsystems. Across 28 packages the design used 74,442 transistors. Chips came in six dual in-line package styles. No process node figure is given for the fabrication.
Where it went
The system sat in early F-14 Tomcat fighters. It read primary flight controls, switches, static and dynamic air pressure and a temperature probe. From those it derived stall margins and aircraft speed, and it drove wing sweep plus maneuver flaps and slats, while restricting control inputs that would exceed limits.
Versions and family
The CADC is described as a multi-chip set rather than a single part. Its 28 packages come in six unique DIP types arranged as three modules, and any module can run on its own. Extra modules can be added to grow the system. No named successor appears in the record.
Why it matters
The CADC is cited as the first military aircraft installation of custom digital integrated circuits, and has been claimed as the first microprocessor chipset. The contemporary Intel 4004 lacked the throughput and I/O needed for this role. Because the Navy held the design secret until 1998, its place in processor history stayed largely out of public view.
Problems and reception
The Navy classified the project and kept it sealed until 1998, which delayed public discussion. Holt's 1971 magazine article on the system was itself withheld under that classification. Debate over the 'first microprocessor' claim continues, since the CADC was a chipset rather than a single-chip CPU.
Questions people ask about F-14 Central Air Data Computer
What did the CADC actually compute?
From pitot and static pressure and temperature it derived altitude, vertical speed, air speed and Mach number. It also fed stall and speed limits, drove wing sweep and maneuver flaps and slats, and capped control inputs that would push the aircraft past safe limits.
Why isn't it a single chip like a modern CPU?
Chip technology around 1970 could not fit enough transistors on one die for a flight processor. The job was therefore split across 28 packages of six types, grouped into three modules that each run their own pipeline.
How does it compare with the Intel 4004?
The 4004 appeared around the same time and is called the first commercial microprocessor. It lacked the computing power and interfacing needed for the CADC's task, so the CADC used a custom multi-chip set instead.
Who built it and when was it finished?
Garrett AiResearch led the work, with a team under Steve Geller and Ray Holt and support from the startup American Microsystems. Design started in 1968 and wrapped up in June 1970, ahead of electromechanical alternatives for the F-14.
Good reading and sources
- The Secret History of the First Microprocessor, the F-14, and MeWired, Article
- The MP944 was the ‘real’ world’s first microprocessor, but it was top secret for nearly 30 years — F-14 TomcatTom's Hardware, Article
The facts on this page come from the Wikipedia article "F-14 CADC", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like F-14 Central Air Data Computer
All CPUs and microprocessors
🇯🇵 JapanΜCOM-4
NEC original 4-bit single-chip microprocessor from 1973Microcontroller · Other · 1973