Arrandale
Intel's 2010 dual-core laptop chips with graphics and memory control on package
Arrandale is the code name for a family of dual-core mobile processors from Intel, launched on 7 January 2010 at CES. Built on the Westmere 32 nm shrink of Nehalem, it packed graphics, memory control and PCI Express into the package, letting laptop makers build smaller systems than the older Penryn generation allowed.
- Launched 7 January 2010 at CES
- Two dies: 32 nm CPU plus 45 nm graphics and memory controller
- Clock speeds from 1.06 GHz to 2.80 GHz
- Sold as Core i3, i5, i7, Pentium and Celeron mobile chips
- Embedded E-series parts add ECC memory and PCIe bifurcation
What it is
Arrandale is the code name for a line of dual-core laptop processors from Intel, sold as mobile Core i3, i5 and i7 chips and also as Celeron and Pentium parts. It arrived on 7 January 2010 during CES. The design is based on Westmere, a 32 nm shrink of the Nehalem microarchitecture, and it is the mobile twin of the desktop Clarkdale. What set it apart was putting graphics, memory control, PCI Express and a DMI link on the package, so a laptop no longer needed a separate north bridge chip to handle those jobs.
How it came about
Arrandale replaced Penryn, the 45 nm Core-microarchitecture part used across many mobile Core 2, Celeron and Pentium Dual-Core notebooks. Penryn systems normally relied on both a north bridge and a south bridge. By folding the main north bridge duties into the processor package, Arrandale allowed noticeably more compact laptop designs. Intel launched the family at CES on 7 January 2010. The code name comes from a place in British Columbia.
Inside the chip
Each package carries two separate dies. One is the 32 nm processor die with its I/O connections; the other is a 45 nm die holding Intel HD Graphics (Ironlake) and the integrated memory controller. Keeping the memory controller off the CPU die pushed memory latency up compared with a single-die layout. The chips have two cores, 128 KB of L1 cache per core (split 32 KB instructions and 32 KB data), 512 KB of L2 per core, and up to 4 MB of shared L3. The x86 and x86-64 instruction set is supported, along with MMX, SSE through SSE4.2 and AES-NI. Memory runs as dual-channel DDR3-1333 up to 8 GB.
How it was made
Intel built Arrandale on its 32 nm process for the processor die, while the graphics and memory controller die used 45 nm. The two dies sit together in one package, offered as rPGA-988 or BGA-1288. Clock speeds across the family run from 1.06 GHz up to 2.80 GHz.
Where it went
The chips went into laptops, sold under the Celeron, Pentium, Core i3, Core i5 and Core i7 names. Only Core i7 models carried the full L3 cache and the complete feature set. Embedded variants, marked with an E rather than an M, added support for PCIe bifurcation and ECC memory. Standard mobile parts were limited to a single PCIe port and non-ECC memory.
Versions and family
Arrandale spans several brand lines: Celeron P4xxx and U3xxx, Pentium P6xxx and U5xxx, Core i3-3xxUM and 3xxM, Core i5-4xxUM, 4xxM, 5xxUM and 5xxM, and Core i7-6xxUM, 6xxLM and 6xxM. Celeron models carry the smallest L3 cache at 2 MB. The desktop relative is Clarkdale. Penryn came before it and Sandy Bridge followed it.
Why it matters
By absorbing the north bridge functions, Arrandale helped laptop makers shrink their boards and simplify their designs. It also brought Intel HD Graphics and a memory controller onto the processor package for mainstream notebooks, a step towards the fully integrated designs that followed with Sandy Bridge.
Problems and reception
Splitting the processor and memory controller across two separate dies raised memory latency, a trade-off of the two-die package. The family is now listed as unsupported.
Questions people ask about Arrandale
What is Arrandale?
It is Intel's code name for a family of dual-core mobile processors launched in January 2010. Sold as Core i3, i5 and i7, plus Pentium and Celeron, the chips use the Westmere design and carry graphics and memory control on the package.
Why does the package hold two dies?
One 32 nm die is the processor with its I/O, and a separate 45 nm die holds Intel HD Graphics and the integrated memory controller. Splitting them this way increased memory latency compared with putting everything on one die.
What did Arrandale replace?
It succeeded Penryn, the 45 nm Core-microarchitecture chip used in many mobile Core 2, Celeron and Pentium Dual-Core notebooks. Sandy Bridge came after it.
How is the embedded version different?
Models ending in E rather than M support PCIe bifurcation and ECC memory. The regular mobile versions offer only a single PCIe port and non-ECC memory.
How much cache do these chips have?
Each core gets 128 KB of L1 and 512 KB of L2, with up to 4 MB of shared L3. Only Core i7 models use the full L3, while Celeron versions have just 2 MB.
Good reading and sources
The facts on this page come from the Wikipedia article "Arrandale", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.