Am2045
Parallel processor array for embedded video and imaging tasks
The Am2045 is a chip with hundreds of small processors working together. It was designed by Ambric in Oregon and launched in 2007 for high-performance embedded systems like medical scanners.
- Contains 336 independent 32-bit RISC-DSP processors
- Delivers 1 TeraOPS of fixed-point processing power
- Consumes only 6 to 12 watts during operation
- Programmed using a subset of Java or assembly code
What it is
The Am2045 is a Massively Parallel Processor Array (MPPA) chip. It contains hundreds of small computing units that work at the same time. Ambric, a company based in Beaverton, Oregon, created this device. The chip targets heavy data tasks in embedded systems. It handles video streams and signal analysis efficiently. Instead of one fast core, it uses many simple ones. This design helps with power usage and speed for specific jobs.
How it came about
Jay Eisenlohr and Anthony Mark Jones started the company in 2003. They aimed to build a new type of parallel processor. The team introduced the Am2045 hardware and its software tools in 2007. The financial crisis of 2008 hurt the business. The technology survived for a while through Nethra Imaging. That firm kept selling the chips and tools until it closed in 2012.
Inside the chip
The chip holds 336 fixed-point processors. Each one is a 32-bit RISC-DSP unit. They run at speeds up to 300 MHz. Every processor has its own 2-kibibyte memory block. Data moves between them via reconfigurable channels. These links handle both communication and timing sync. Programmers write code in a strict subset of Java or assembly. The model resembles a Kahn process network with bounded buffers.
How it was made
Specific details about the manufacturing plant or transistor count are not provided in the records. The chip integrates 336 processing elements and their local memories on a single die. It uses an interconnect system to link these units. The design focuses on distributed memory rather than shared resources. This approach avoids the bottlenecks found in traditional multicore chips.
Where it went
Engineers used this chip for high-definition video tasks. It supports 2K and 4K compression and transcoding. Medical imaging systems also benefit from its parallel nature. One X-ray system used forty of these chips. That setup contained over 13,000 cores for 3D reconstruction. It fit in a single chassis and used under 500 watts. Other applications include software-defined radio and image recognition.
Versions and family
The Am2045 was the primary device released by the company. No other specific model numbers are listed in the available text. It belongs to the broader Ambric architecture family. This architecture is distinct from standard multicore designs by Texas Instruments or Freescale. Those competitors typically offer fewer cores with shared memory models.
Why it matters
Microprocessor Report gave the architecture an innovation award in 2006. Judges praised the design concept of the massive parallel array. Later, in 2013, the IEEE recognized the work again. It received a Top 20 award for significant publications in field-programmable computing. The chip offered a software-based alternative to FPGA and ASIC designs for streaming media.
Problems and reception
The company claimed higher productivity because developers could use software skills. They did not need deep hardware design knowledge for every task. The chip promised better energy efficiency than traditional solutions. However, the business struggled during the 2008 economic downturn. The technology continued briefly under new ownership before fading from the market.
Questions people ask about Am2045
What kind of processor is the Am2045?
It is a Massively Parallel Processor Array. It uses 336 small RISC-DSP cores that work together. Each core has its own memory and connects via reconfigurable channels.
How do programmers write code for this chip?
Developers use a strict subset of conventional Java or assembly language. The model allows data and control messages to pass between processors through self-synchronizing channels.
What applications used the Am2045 chip?
It was used for medical imaging, video compression, and signal processing. One X-ray system used forty chips for 3D reconstruction. It also handled software-defined radio tasks.
Who founded the company behind this chip?
Jay Eisenlohr and Anthony Mark Jones founded Ambric in 2003. They were based in Beaverton, Oregon. Eisenlohr had previously sold Rendition, Inc. to Micron Technology.
Good reading and sources
The facts on this page come from the Wikipedia article "Ambric", written by its contributors and used under the CC BY-SA 4.0 licence, and from its Wikidata record (CC0). EveryChip rewrote the text in its own words, with AI assistance, and compares every page with the article to make sure no passage is copied. It may be reused under the same CC BY-SA 4.0 licence with a link back.
It may contain mistakes, and figures change over time. Nothing here is investment or buying advice. If something is wrong, tell us. Last refreshed 2026-11-14.
Like Am2045
All AI accelerators
🇺🇸 United StatesBlackfin
Hybrid microprocessor and DSP family by Analog DevicesMicrocontroller · RISC · 2000
WorldMDSP
Multiprocessor digital signal processor family for video tasksDSP · RISC
🇺🇸 United StatesDaVinci
System on chip family for embedded video and vision tasksSoC · Arm · 2005
🇬🇧 United KingdomImagination META
Multithreaded 32-bit microprocessor for embedded systemsCPU · Other · 2001